24/7 dispatch for towing and roadside help Serving Rochester and 30 nearby towns

24/7 in Rochester and Monroe County

Equipment Transport in Rochester, NY

Skid steers, scissor lifts, mini excavators, compactors and other small machinery moved on a flatbed between yards, rental counters and job sites, with the price agreed before a truck is sent.

Call 585-284-2606 Tap to call now Request service online
  • QuoteEquipment transport, quoted by phone
  • 24/7nights, weekends and holidays
  • 30 townsin Monroe, Ontario and Wayne counties
Illustration of a Tow Me flatbed tow truck carrying a silver car

Getting compact equipment from the yard to the dig

In short: Equipment Transport in Rochester: quoted by phone, open 24 hours, 7 days a week, call 585-284-2606. Performed by our flatbed or an independent local operator we dispatch.

A crew in Henrietta that starts digging at 7 AM and a rental contract that charges another day if the lift comes back late both run on the clock, and a machine with no ride wastes it. When the skid steer has to be on site before the first shift, or the scissor lift has to be returned before the daily rate rolls over, a missing trailer turns into a lost morning. Equipment transport fills that gap: a flatbed comes to the machine, the operator loads it, chains it down and delivers it where the crew is working.

A flatbed that carries a disabled car can also carry small construction and landscaping equipment, as long as the machine fits the deck and the weight rating. Compact machines within that limit can ride on our own flatbed tow truck; anything longer, taller or heavier is moved by an independent local operator we dispatch, with a deck rated for the load. Typical loads are skid steers and compact track loaders, mini excavators, scissor and boom lifts, plate compactors, trenchers, forklifts, small rollers and the attachments that go with them. If a machine drives, it is walked onto the deck under its own power. A machine that will not run comes up the tilted deck on the winch cable.

A 3,000-pound compactor and a 9,000-pound track loader are not the same job, so there is no single posted rate for this service. Tell the dispatcher what the machine is, where it sits and where it needs to be, and you get a single figure for the whole move before anyone commits.

What is included

  • A deck matched to the load

    The dispatcher matches the machine's weight and footprint to a truck with the deck length and rating to carry it. If a load is too heavy or too tall for anything we can send, you hear that on the phone instead of watching a truck show up and turn around.

  • Loading under power or by winch

    A running machine is driven onto the deck at a shallow angle. One that will not start rides up on the cable instead, and a quarter hour of winch time comes with the quote.

  • Chains and binders, not just straps

    Tracked and wheeled equipment is chained at the tie-down points and tensioned with binders, with the bucket or boom lowered and pinned so nothing shifts on I-490 or a rough farm lane.

  • Attachments ride along

    Buckets, forks, augers and pallets of fittings go on the same deck when there is room, so one trip covers the machine and what it needs to work.

  • Delivery onto the site

    The machine is unloaded on the pad, the driveway or the staging area your foreman points to, not at the curb, as long as the ground will hold the truck.

  • Receipts for the job file

    An itemized invoice, with the machine, pickup and drop-off written on it, so the move can be billed through to the project.

How it works

  1. Tell us about the machine

    Make and model, approximate weight, whether it runs and steers, tracks or tires, and the height with the boom or mast down. A photo texted to the dispatcher helps when you are not sure of the numbers.

  2. Get one price for the move

    The dispatcher quotes the full job, pickup to drop-off, including any winching, waiting time or after-hours surcharge that applies, tells you who will carry it, and that is the price on the invoice.

  3. Pickup and tie-down

    The operator positions the truck on firm ground, loads the machine, lowers and pins the attachment and chains it at four points. The binders are checked before the truck pulls away.

  4. Delivery and sign-off

    The machine comes off where you asked, the keys go to whoever is on site and the invoice follows. If the machine has to come back at the end of the job, book the return trip at the same time and the dispatcher schedules both.

Equipment Transport prices in Rochester

Equipment transport is quoted by phone. Have the make and model, the approximate weight, both addresses and the time the machine has to be on site, and the dispatcher turns those into one number. The quote you hear is the figure on the invoice.

Equipment Transport pricing guidance
SituationPrice
Equipment transport, any machine a flatbed can carryquoted by phone
Extra winching beyond the first 15 minutes$45 per 15 minutes
Waiting time after the first 15 minutes$20 per 15 minutes
Difficult access or tight site$50
Night moves, 10 PM to 6 AM+$30
Weekends and holidays+$45

Example: a running skid steer moved from a contractor's yard in Gates to a job site in Pittsford is quoted by phone from its weight, the roughly 12 loaded miles and the time of day. The dispatcher gives you the total before 8% sales tax, and a return trip booked at the same time is quoted alongside it.

Get a price for this job

See the full published price list

Equipment Transport across Rochester and Monroe County

Much of this work runs along I-390, I-590 and Route 252 into Henrietta, Brighton and Chili, where the contractor yards and rental counters are. Lifts and loaders headed to sites near Rochester Institute of Technology, Eastview Mall or The Marketplace Mall are everyday moves, and so are runs out Route 31 and Route 104 to Spencerport, Webster and the orchards past Hilton. In winter the lake-effect snow off Lake Ontario means a site that was firm on Monday can be mud by Thursday, so tell the dispatcher what the ground is like and the operator will pick a spot the truck can get out of.

  • Rochester
  • Greece
  • Henrietta
  • Irondequoit
  • Webster
  • Brighton
  • Gates
  • Chili
  • Penfield
  • Pittsford
  • Fairport
  • Perinton
  • Victor
  • Spencerport
  • Hilton
  • East Rochester
  • Churchville
  • Scottsville
  • Rush
  • Mendon
  • Honeoye Falls
  • Brockport
  • Ontario
  • Walworth
  • Macedon
  • Canandaigua
  • Farmington
  • Hamlin
  • Parma
  • Ogden

Equipment Transport questions, answered

Which machines can you move?

Most compact gear, such as a skid steer, a scissor lift or a mini excavator. Small machines that fit the deck and weight rating of our flatbed can ride on it; larger ones are carried by an independent local operator we dispatch, with a deck rated for the load. Give the dispatcher the model and approximate weight and you get a yes or no on the phone. Full-size excavators, dozers and loaded dump trucks are heavy-duty work, and the dispatcher will tell you whether a heavy operator can be arranged.

How much does equipment transport cost in Rochester?

It is quoted by phone, because the price depends on the machine's weight and size, the loaded distance, whether it drives onto the deck or has to be winched, and the time of day. Most moves inside Monroe County are a single flat figure that includes loading, tie-down and unloading. Winching past the first 15 minutes is $45 per 15 minutes, waiting time past the first 15 minutes is $20 per 15 minutes, moves between 10 PM and 6 AM add $30, and weekends and holidays add $45. Sales tax of 8% applies for private-pay customers.

My lift has a dead battery. Can you still haul it?

Yes. A lift or loader that will not run is pulled up the tilted deck on the winch cable, and tracked machines come aboard the same way with the tracks turning freely or sliding on the deck plates. If the machine has a locked drive or a stuck brake, tell the dispatcher so the operator brings the right rigging.

How soon can you pick up my equipment?

The dispatcher gives you an estimated arrival time when you call, and dispatch answers 24/7, so an early-morning or late-night move can be arranged. For a scheduled job, call the day before and the dispatcher tells you what pickup time can be arranged. If the machine has to be on site by a set hour, say so and the dispatcher plans the pickup around it.

Does anyone have to be on site when the driver arrives?

Someone who can hand over the machine at pickup is best, especially if it needs to be started or the keys are in a lockbox. At delivery the operator can unload without you if you tell the dispatcher exactly where on the site it goes and the ground will take the truck. Either way the invoice goes to you, and the machine is not left on a public street.

Can you carry the attachments and small tools too?

Yes, as long as they fit on the deck with the machine and the total stays under the truck's rating. Buckets, forks, augers, a pallet of fittings and a couple of gas cans are normal. Tell the dispatcher what is coming so the operator knows how much deck is spoken for before the machine goes on.

Do you handle rental returns and dealer pickups?

Yes. A machine can be collected from a rental yard or dealer lot, delivered to the site and brought back when the job is done. Booking the return trip at the same time as the delivery makes it easier to land before the rental period ends. The dispatcher needs the rental company's hours and the name on the contract so the yard releases the machine to the driver.

Which areas do you cover for equipment transport?

Equipment moves go to every one of the 30 towns listed on the service area page, spread over Monroe County, Ontario County and Wayne County, starting with Rochester and reaching out along I-390, I-490 and Route 104. Longer hauls elsewhere in New York State get a phone quote built from the machine, the mileage and the schedule, with one truck booked for the whole trip.

Call Tow Me Rochester now

One number, 24/7. Tell us where you are and what the vehicle is doing. The dispatcher gives you the price and an estimated arrival time before anything is sent.

Call 585-284-2606
Phone
585-284-2606
Email
Towme.rochesterny@gmail.com
Dispatch office
42 Mt Hope Ave, Rochester, NY 14620 (dispatch only, not a walk-in location)
Hours
Open 24 hours, 7 days a week

Request service online

Choose a service, tell us where the vehicle is and how to reach you. Nothing is booked until a dispatcher calls and you agree to the price.

What you need
Your vehicle
How to reach you

A dispatcher calls you back within a few minutes to confirm the price and an estimated arrival time.

Tow Me operates its own flatbed tow truck and also dispatches independent local operators. Your job may be performed by either.

By sending this request you agree to our Terms of Service.

In traffic or an unsafe spot? Do not wait for a callback. Call 585-284-2606 now.